1.HARDOX High strength steel frame.
2.Frame with internal and external reinforcements.
3.Hydraulic piston motor (32cc or 41cc optional).
4.Pressure relief and anti-cavitation valve.
5.3 ways flow control valve-pressure compensated.
6.Hydraulic pipes and connections protected by spiral (2m).
7.Standard equipped with Mechanical linkage kit for the housing opening.
8.Hydraulic cylinder kit for the housing opening as optional.
9.High-strength forged blade.
10.Skids.
11.Belt-transmission (with 3 belts).
12.Connecting head HS-060 –S50 (optional).
| Design value | ||||
| EFMS/R 80 | EFMS/R 100 | |||
| 1 | Cutting width | mm | 800 | 1000 |
| 2 | Tool shaft diameter | mm | 410 | 410 |
| 3 | Number of blades | PC | 14 | 18 |
| 4 | Total Weight | Kg | 390 | 430 |
| 5 | Speed control valve flow | L/min | 60-70 | 80-90 |
| 6 | Preset pressure | Bar | 250 | 250 |
| 7 | Maximum mowing diameter | cm | 10 | 10 |
| 8 | Adapt to the tonnage of the excavator | T | 5.0-10 | 5.0-10 |
Features:
(1) French imported brand, the plunger motor has high working pressure and high speed;
(2) 45° inclined axis piston motor, compact structure, small volume, harmonious and beautiful space layout.
Features:
(1) A pressure-compensated flow control valve composed of a logic valve and a throttle valve, the output flow of the R port is stable, and the flow rate is set before leaving the factory for motors with different speeds;
(2) The valve block integrates an oil replenishment relief valve, which sets the maximum working pressure of the motor and supplies oil to the motor during shutdown.
Features:
(1) The belt adopts imported brand (GATES) with good quality;
(2) A set of 3 belts ensures the high-power and high-intensity output of the cutter shaft.
Features:
(1) It is composed of high-hardness HARDOX400 wear-resistant steel plate welding, which is suitable for various harsh working conditions;
(2) The sliding shoe mechanism can make the machine run smoothly and protect the cutter shaft.
Features:
(1) High-strength forged blade
The rotary support bearing of the mower shaft adopts imported brand (SKF), which has higher rated load and lower noise, which greatly increases the service life of the machine.
Normally we use iron frame for the packing. This makes it easy to stack up and easy for transportation.
A: Our products are covered almost all farm machines, such as ATV mowers, flair mowers, finishing mowers, rotary cutters, wood chippers, backhoes, rotary tillers, stone buriers, post hole diggers, snow blowers, flair collectors, rotary rakes, excavator attachments and mini loader attachments.
A: In general, we can ship the goods within 30-45days after receiving your payment.
A: Yes, all of our products have 12 month quality assurance to make sure that we supply you best quality.
A: Of course, you just need to send us the picture of your brand.
Usually 30% T/T deposit for the order after confirming the contract, and then 70% balance before shipping or against copy of B/L.
A: Yes, you can mix different products or models in a container and we will try our best to use the container place.
A: T/T, L/C.
1.HARDOX High strength steel frame.
2.Frame with internal and external reinforcements.
3.Hydraulic piston motor (32cc or 41cc optional).
4.Pressure relief and anti-cavitation valve.
5.3 ways flow control valve-pressure compensated.
6.Hydraulic pipes and connections protected by spiral (2m).
7.Standard equipped with Mechanical linkage kit for the housing opening.
8.Hydraulic cylinder kit for the housing opening as optional.
9.High-strength forged blade.
10.Skids.
11.Belt-transmission (with 3 belts).
12.Connecting head HS-060 –S50 (optional).
| Design value | ||||
| EFMS/R 80 | EFMS/R 100 | |||
| 1 | Cutting width | mm | 800 | 1000 |
| 2 | Tool shaft diameter | mm | 410 | 410 |
| 3 | Number of blades | PC | 14 | 18 |
| 4 | Total Weight | Kg | 390 | 430 |
| 5 | Speed control valve flow | L/min | 60-70 | 80-90 |
| 6 | Preset pressure | Bar | 250 | 250 |
| 7 | Maximum mowing diameter | cm | 10 | 10 |
| 8 | Adapt to the tonnage of the excavator | T | 5.0-10 | 5.0-10 |
Features:
(1) French imported brand, the plunger motor has high working pressure and high speed;
(2) 45° inclined axis piston motor, compact structure, small volume, harmonious and beautiful space layout.
Features:
(1) A pressure-compensated flow control valve composed of a logic valve and a throttle valve, the output flow of the R port is stable, and the flow rate is set before leaving the factory for motors with different speeds;
(2) The valve block integrates an oil replenishment relief valve, which sets the maximum working pressure of the motor and supplies oil to the motor during shutdown.
Features:
(1) The belt adopts imported brand (GATES) with good quality;
(2) A set of 3 belts ensures the high-power and high-intensity output of the cutter shaft.
Features:
(1) It is composed of high-hardness HARDOX400 wear-resistant steel plate welding, which is suitable for various harsh working conditions;
(2) The sliding shoe mechanism can make the machine run smoothly and protect the cutter shaft.
Features:
(1) High-strength forged blade
The rotary support bearing of the mower shaft adopts imported brand (SKF), which has higher rated load and lower noise, which greatly increases the service life of the machine.
Normally we use iron frame for the packing. This makes it easy to stack up and easy for transportation.
A: Our products are covered almost all farm machines, such as ATV mowers, flair mowers, finishing mowers, rotary cutters, wood chippers, backhoes, rotary tillers, stone buriers, post hole diggers, snow blowers, flair collectors, rotary rakes, excavator attachments and mini loader attachments.
A: In general, we can ship the goods within 30-45days after receiving your payment.
A: Yes, all of our products have 12 month quality assurance to make sure that we supply you best quality.
A: Of course, you just need to send us the picture of your brand.
Usually 30% T/T deposit for the order after confirming the contract, and then 70% balance before shipping or against copy of B/L.
A: Yes, you can mix different products or models in a container and we will try our best to use the container place.
A: T/T, L/C.
