Products

EMHR105/125/150 flail heads

There are HS-040-S50, HS-040-S5040, HS-060-S50, 3 kinds of connectors can be connected to different types of excavators
1.Frame with internal and external reinforcements.
2.Self-leveling parallelogram device,mechanically lockable.
3.Pressure relief and anti-cavitation valve.
4.3 ways flow control valve-pressure compensated.
5.Hydraulic pipes and connections protected by spiral (1.6m)
6.Hydraulic gear motor,up to 30 bar of back pressure on the discharge.
7.Direct drive.
8.Rear adjustable roller.
9.Front adjustable bonnet.
10.Protection with abrasion-proof rubberized front and rear protections.
 
  • EMHR105/125/150

  • MATENG

  • 105cm-125cm-150cm

Availability:
Quantity:
facebook sharing button
linkedin sharing button
sharethis sharing button

Overview


Introducing the new and exclusive Mateng range of Hydraulic Flail Head Mowers, available in the Light, Midi and Powerful series; and specially designed for use on Excavators.


Mateng hydraulic drive mower is a construction machinery excavator attachment with independent intellectual property rights developed by Changzhou Mateng Machinery Co., Ltd. It can be used for cutting irrigation and weeding in the weed environment of gardens and shrubs. It is equipped with excavators of different tonnage and sizes. The machine can work in different ranges.


Mateng hydraulic drive mower has novel and unique structure, flexible and convenient operation, stable and reliable performance, energy-saving and high-efficiency operation, and has strong adaptability to garden and shrub operations. It is the most ideal mowing machine.


Features of EMHR 105/125/150 flail heads

Standard:

1.Frame with internal and external reinforcements.

2.Self-leveling parallelogram device,mechanically lockable.

3.Pressure relief and anti-cavitation valve.

4.3 ways flow control valve-pressure compensated.

5.Hydraulic pipes and connections protected by spiral (1.6m)

6.Hydraulic gear motor,up to 30 bar of back pressure on the discharge.

7.Direct drive.

8.Rear adjustable roller.

9.Front adjustable bonnet.

10.Protection with abrasion-proof rubberized front and rear protections.

Accessories:

There are HS-040-S50, HS-040-S5040, HS-060-S50, 3 kinds of connectors can be connected to different types of excavators



Product Specifications


No Item Unit Design   value
EMHR105 EMHR125 EMHR150
1 Length x Width x Height mm 1271×830×636 1467×830×636 1721×830×636
2 Cutting width mm 1050 1250 1500
3 Tool shaft diameter mm 412 412 412
4 Number of Y-Blades PC 36 44 56
5 Long Hoe Blade quantity PC 18 22 28
6 Short Hoe Blade quantity PC \ 18 \
7 Total Weight Kg 300 350 400
8 Speed control valve flow L/min 60-80

Tool shaft speed Rpm 2600-3500
9 Fixed work stress Bar 220

Maximum allowable pressure of return oil Bar 20
10 Maximum cutting diameter of Y-blade cm 4 4 4
11 Long hoe knife Maximum cutting diameter cm 6 6 6
12 Short hoe knife Maximum cutting diameter cm 8 8 8
13 Roller diameter mm 152 152 152
14 Adapt to the tonnage of the excavator T 5.5-10 5.5-10 8-10



Details


Hydraulic motor direct drive

Features:

(1) Imported brand from Italy, gear motor with high working pressure and high speed (3500rpm);

(2) High-performance shaft seal, high temperature resistance, surface linear speed rotation up to 6m/s, can make the motor housing pressure 30bar, effectively reduce the oil leakage failure of the motor shaft seal;

(3) The motor directly drives the cutter shaft for mowing, with compact structure and beautiful layout.


Flow speed control valve

Features:

(1) A pressure-compensated flow control valve composed of a logic valve and a throttle valve, the output flow of the R port is stable, and the flow rate is set before the factory to match the motors with different speeds and marked with a range of ±1;

(2) The valve block is integrated with an oil replenishment relief valve, which sets the maximum working pressure of the motor and supplies oil to the motor during shutdown.


Connector floating device

Features:

(1) The floating device is composed of a parallel four-bar linkage mechanism. During the mowing operation, when encountering high-slope and low-pit terrain, it can not only allow the mowing head to float with the terrain without changing the mowing angle, but also protect the mowing. The machine can prevent damage from impact, and can also prevent missed cutting and avoid secondary operations;

(2) Lock the latch, and lock the floating mechanism for straight work when needed, such as pruning fence branches.


SKF bearing-Knife Shaft Rotary Support Bearing


The rotary support bearing of the mower shaft adopts imported brand (SKF), which has higher rated load and lower noise, which greatly increases the service life of the machine.



Packaging & Shipping


Normally we use iron frame for the packing. This makes it easy to stack up and easy for transportation.


1. Iron Frame with Plastic Film

Iron Frame with Plastic Film

Standard Package for Free


2. Iron Frame with Shrink Film

Iron Frame with Shrink Film

Optional Package with Extra Charge
3. Plywood Package

Plywood Package

Optional Package with Extra Charge



Company Information

matengnew


FAQ

Q1. What are your main products?

A: Our products are covered almost all farm machines, such as ATV mowers, flair mowers, finishing mowers, rotary cutters, wood chippers, backhoes, rotary tillers, stone buriers, post hole diggers, snow blowers, flair collectors, rotary rakes, excavator attachments and mini loader attachments.


Q2: How long is the delivery date?

A: In general, we can ship the goods within 30-45days after receiving your payment.


Q3. Do you have after-sales service?

A: Yes, all of our products have 12 month quality assurance to make sure that we supply you best quality.


Q4. Can you print my brand name on it?

A: Of course, you just need to send us the picture of your brand.


Q5. what's your payment term?

Usually 30% T/T deposit for the order after confirming the contract, and then 70% balance before shipping or against copy of B/L.


Q6. Can I mix different models together?

A: Yes, you can mix different products or models in a container and we will try our best to use the container place.


Q7. What are your terms of payment?

A: T/T, L/C.




Previous: 
Next: