G.ATV120
Mateng
Gasoline
17.5HP
Electric start
| Quantity: | |
|---|---|
This is a 17.5HP independent towable mower with a cutting width of approximately 1120mm.
The G.ATV120 Finishing Mower is ideally suited for equestrian pasture, parkland, golf courses, sports ground care, leisure parks, large lawns or anywhere that has large areas of grass which requires mowing to a high standard. It has an adjustable cutting height from 89mm to 190mm and is powered by an economical 17.5HP electric start engine with 2 cutting blades rotating at up to 3600 rpm.
With an adjustable centre or offset drawbar with 50mm ball hitch which allows it to be towed by most ATV's, UTV's, small tractors and 4×4 vehicles. The G.ATV120 Finishing Mower is capable of cutting through most grasses up to a height of 190mm however, should you suffer from large areas of rough pasture, rushes, thistles etc then please see our other listing for the Heavy Duty Mower.
1. Being powered by an economical, easy to start 17.5HP electric start engine with a wide range of conditions.
2. The G.ATV finishing mower incorporates easy height adjustment, having an adjustable cutting height from 89mm to 190mm.
3. Being towed by most ATV's, UTV's, small tractors and 4×4 vehicles.
4. Precise dynamic balance to be done on the blade shaft with blades on, unbalanced weight less than 30g.
5. CE Approved.
| Engine Brand | Loncin,17.5hp gasoline engine |
| Starting Type | Electric |
| Fuel Tank Capacity | 2 gallons |
| Recommended oil/capacity(L) | 30 SAE/0.5L |
| Cutting width(mm) | 1120 |
| Cutting capacity | 4ft high grass, 8ft high weeds & brush |
| Cutting height(mm) | 89-190 |
| Number of blades(pcs) | 2 |
| Wheel size(cm) | 16×6.5x8 |
| Assembled dimensions, no tongue(mm) | 1630×1567×635 |
| Assembled dimensions, with tongue(mm) | 3150×1567×635 |
| Net Weight(kg) | 240 |
Normally we use iron frame for the packing. This makes it easy to stack up and easy for transportation.
A: Our products are covered almost all farm machines, such as ATV mowers, flair mowers, finishing mowers, rotary cutters, wood chippers, backhoes, rotary tillers, stone buriers, post hole diggers, snow blowers, flair collectors, rotary rakes, excavator attachments and mini loader attachments.
A: In general, we can ship the goods within 30-45days after receiving your payment.
A: Yes, all of our products have 12 month quality assurance to make sure that we supply you best quality.
A: Of course, you just need to send us the picture of your brand.
Usually 30% T/T deposit for the order after confirming the contract, and then 70% balance before shipping or against copy of B/L.
A: Yes, you can mix different products or models in a container and we will try our best to use the container place.
A: T/T, L/C.
This is a 17.5HP independent towable mower with a cutting width of approximately 1120mm.
The G.ATV120 Finishing Mower is ideally suited for equestrian pasture, parkland, golf courses, sports ground care, leisure parks, large lawns or anywhere that has large areas of grass which requires mowing to a high standard. It has an adjustable cutting height from 89mm to 190mm and is powered by an economical 17.5HP electric start engine with 2 cutting blades rotating at up to 3600 rpm.
With an adjustable centre or offset drawbar with 50mm ball hitch which allows it to be towed by most ATV's, UTV's, small tractors and 4×4 vehicles. The G.ATV120 Finishing Mower is capable of cutting through most grasses up to a height of 190mm however, should you suffer from large areas of rough pasture, rushes, thistles etc then please see our other listing for the Heavy Duty Mower.
1. Being powered by an economical, easy to start 17.5HP electric start engine with a wide range of conditions.
2. The G.ATV finishing mower incorporates easy height adjustment, having an adjustable cutting height from 89mm to 190mm.
3. Being towed by most ATV's, UTV's, small tractors and 4×4 vehicles.
4. Precise dynamic balance to be done on the blade shaft with blades on, unbalanced weight less than 30g.
5. CE Approved.
| Engine Brand | Loncin,17.5hp gasoline engine |
| Starting Type | Electric |
| Fuel Tank Capacity | 2 gallons |
| Recommended oil/capacity(L) | 30 SAE/0.5L |
| Cutting width(mm) | 1120 |
| Cutting capacity | 4ft high grass, 8ft high weeds & brush |
| Cutting height(mm) | 89-190 |
| Number of blades(pcs) | 2 |
| Wheel size(cm) | 16×6.5x8 |
| Assembled dimensions, no tongue(mm) | 1630×1567×635 |
| Assembled dimensions, with tongue(mm) | 3150×1567×635 |
| Net Weight(kg) | 240 |
Normally we use iron frame for the packing. This makes it easy to stack up and easy for transportation.
A: Our products are covered almost all farm machines, such as ATV mowers, flair mowers, finishing mowers, rotary cutters, wood chippers, backhoes, rotary tillers, stone buriers, post hole diggers, snow blowers, flair collectors, rotary rakes, excavator attachments and mini loader attachments.
A: In general, we can ship the goods within 30-45days after receiving your payment.
A: Yes, all of our products have 12 month quality assurance to make sure that we supply you best quality.
A: Of course, you just need to send us the picture of your brand.
Usually 30% T/T deposit for the order after confirming the contract, and then 70% balance before shipping or against copy of B/L.
A: Yes, you can mix different products or models in a container and we will try our best to use the container place.
A: T/T, L/C.
